J37A engine

ENGINE J37A
Back in 2007, the legendary J37 motor was released specifically for Acura cars. The basis of the new engines was the J35 model, which has proven itself in the early large-volume models of the Akura and Honda since 1999. Both engines are combined by V-shaped blocks with a height of 235 mm with six cylinders. Unlike J35, in which the crankshaft had a 93mm piston stroke, in J37 this parameter was already equal to 96mm. The diameter of the cylinders increased by one millimeter, and began to equal 90 mm. The connecting rods were reduced from 158.5mm. up to 157mm. The cylinder head on the J37 was single-shaft with a variable valve timing and VTEC valve lift system.

Specifications
Production Anna engine plant
Engine make J37
Years of production 2007-2014
Cylinder block material aluminum
Injector power system
Type V
Number of Cylinders 6
Valves per cylinder 4
Stroke 96 mm
Cylinder diameter, mm 90
Compression ratio 11
11.2
Engine displacement, cc 3664
Engine power, hp / rpm 295/6300
300/6000
300/6300
305/6300
Torque, Nm / rpm 367/5000
373/5000
370/4500
370/5000
Fuel 95
Environmental Standards —
Engine weight, kg —
Fuel consumption, l / 100 km (for Acura TL)
— city
— track
— mixed. 13.8
9.4
11.5
Oil consumption, gr. / 1000 km to 500
Engine Oil 5W-20
5W-30
How much oil is in the engine, l 4.3
Oil change is carried out, km 10000
(better than 5000)
Engine operating temperature, deg. —
Engine resource, thousand km
— according to the factory
— on practice —
300+

admin

Next Post

ENGINE R20A

Пт Авг 2 , 2019
ENGINE R20A This two-liter unit is nothing more than an extension of the R18A. Increase the volume from 1.8 liters to 2.0 was due to the long-stroke crankshaft. Changes also affected the intake manifold, balancer shafts were installed on the motor. The cylinder head is left with one camshaft, sixteen […]

You May Like

Мета